Předměty

The course content includes mastering the most commonly used prosthetic materials, as well as fixed and removable replacements. Emphasis is placed on the properties of individual materials, their indications, and the technology of their processing.

Poslední úprava: Heneberk Ondřej, MDDr. (06.06.2025)

The student will acquire theoretical knowledge of dental materials.
The student will become familiar with the basic procedures for creating fixed and removable prosthetic works and the workflows for producing prosthetic works in the dental office and dental laboratory.
The student will be introduced to the basic principles of digital technologies in dental prosthetics.
The student will gain basic practical knowledge of the workflows for selected dental products.

Poslední úprava: Heneberk Ondřej, MDDr. (06.06.2025)

Compulsory literature

Craigh, Ward. Restorative Dental Materials. 10th ed., Mosby, 1997. ISBN 0815119208
Wilson. Dental Technology and Materials for Students. 8th ed., Blackwell Scientific Publications, Oxford, 1987. ISBN 0-632-01763-5

Recommend literature

Darvell. Materials science for dentistry. Woodhead Publ., Cambridge, 2009. ISBN 978-1-4398-0105-5

Poslední úprava: Heneberk Ondřej, MDDr. (06.06.2025)

Credit

Attendance 100 % in practical classes. Student has to complete a relevant chapter from e-learning course in Moodle prior the practical classes. E-learning course consists of theoretical informations and instructions for practical classes. Test at the end of each chapter needs to be completed prior clinical classes as well.
Achieve at least 80 % from all practical works evaluated.
Achieve at least 80 % of all minor tests. When at least 90 % achieved, student don´t have to take the credit test. When less than 80 % achieved, oral examination will be used to test the level of student´s knowledges (2nd and 3rd attempt). Absence during minor tests is evaluated as 0 points.
Achieve at least 80 % of credit test. One re-take test with threshold 80% (2nd attempt), oral examination (3rd attempt).

Note: In order to fulfill the content of the practical classes, Frasaco teeth with preparations (26 – cast crown, 24 – composite onlay, 21 – long wrap veneer, 11 – provisional crown, 13 – PFM crown, 34 resin crown) are required within the subject of Preclinical Dentistry. Entry to the phantom laboratory is possible in white work clothes / coat and slippers. The student is obliged to follow the safety instructions, to use protective glasses when working with the micromotor. Eating and drinking are prohibited in the phantom laboratory.

Students are loaned a set modeling tools and artificial Frasaco jaws for practical classes. The student will receive the credit after returning the set of borrowed modeling tools and Frasako jaws.

Examination

Student is allowed to apply for the final exam when all conditions of credit are completed.

In the case of repeating a study obligation, the student is required to complete the study obligation in its entirety.

Poslední úprava: Heneberk Ondřej, MDDr. (06.06.2025)

Lectures

Dental casts in prosthodontics. (Heneberk 1)
Fabrication of fixed restorations. Requirements for fixed restorations. Delivery of fixed restorations (Heneberk 1)
Technology of dental alloys. (Heneberk 1)
Technology of dental ceramic, porcelain fused to metal restorations. (Heneberk 2)
Technology of dental polymers, combined crown. (Heneberk 2)
Fixed temporary restorations (Heneberk 1)
Complete dentures. (Heneberk 2)
Removable partial dentures. (Heneberk 2)
Digital workflow in dental prosthodontics. (Heneberk 3)

Practical courses & seminars

Lecturers

Ondrej Heneberk, MDDr.
Kristýna Hynková, MDDr.
Mgr. Tomas Havrda, DiS.
Jana Smejkalova

Practical courses

Dental impressions and casts fabrication.
Dental impressions and casts fabrication.
Finishing of dental casts.
All-cast metal crown wax-up. frameworks. Lost wax technique.
Metal coping waxing for PFM wax-up.
Casting mould manufacturing, casting procedure.
Deflasking, sand blasting. Finishing of PFM coping. Finishing of all-cast metal crown, adaptation on the tooth, polishing.
PFM coping sand blasting, opaker applying. Finishing of all-cast crown. Test: Impressions and casts in dentistry. Ceramic materials, dental alloys. Porcelain fused to metal restorations.
Applying of ceramic layers for PFM.
Applying of ceramic layers for PFM.
Applying of ceramic layers for PFM.
Corrective firing. Applying of the glaze for PFM.
Esthetical veneer manufacturing.
Veneer adaptation on the tooth
Onlay manufacturing. Test: Polymers in dentistry. Fixed temporary restorations. Conventional and adhesive luting.
Onlay adaptation on the tooth
Temporary crowns fabrication (stamp method, CAD/CAM).
Finishing of fixed restorations.
Luting of veneer, onlay, PFM crown, all-cast crown and temporary crown.
Complete denture – custom tray fabrication.
Partial removable denture – custom tray fabrication.
Complete denture - wax rim fabrication.
Partial removable denture – wax rim fabrication. Test: Complete and partial removable dentures. Materials for removable dentures.
Wire clasps forming. RPD design. Surveing.
Wire clasps forming. RPD design. Surveing.
Wire clasps forming. RPD design. Surveing.
Setting-up the teeth for removable partial denture.
Setting-up the teeth for removable partial denture.
Setting-up the teeth for removable partial denture.
Finishing of evaluated works. Credit.

Poslední úprava: Heneberk Ondřej, MDDr. (06.06.2025)

Prerequisites: FDP005 - Preclinical Dentistry I, FDP006 - Preclinical Dentistry II.

Poslední úprava: Heneberk Ondřej, MDDr. (06.06.2025)